LaserUser.com Forum (formerly RDWorksLab)

Hello friends, just joining in to be in a community of like minded people. Cheap 100w china laser

Welcome Joseph- I would post pictures of your current laser head as the 17mm lens [or was it mirror is not that common- especially on a 100w laser. You might keep in mind that there is really no standards in China and you will likely have to do some modification no matter what you buy. Gene

Here's the laser that we have. And unfortunately we don't have any receipts and I haven't pulled it apart to see exactly what it's internals are as I haven't had a need to thus far, but I can if needed

Your rail is on the front side of the gantry- more commonly they are on the top. Most replacement heads have their mounts horizontal and yours is vertical it appears. I don't think you will find that style but with an adaptor of some sort I am sure it could be done. It could be as simple as a short length of angle iron if you are handy with that sort of thing. Or you could possibly have it made. It would entail removing it and making accurate measurements or tracings. Gene

I see, are there conversion kits by chance? Or would something like this work?(https://lightobject.com/laser-head-moun ... s-lr-type/) I'm sure I could find some scrap that I could bend into that shape, though IDK how exact it would be... Basically I just want to make the laser accept a 20mm lens lol. Is there an easier way to do that, and also would I need any other parts other than the head/lens?