U axis problem

Questions and Answers about LaserBond 100
Post Reply
Alfred Breitkreuz
Posts: 4
Joined: Tue Feb 16, 2021 4:21 pm
Location: Lacombe, Alberta
Country: Canada
Laser Machine Make or Type: Redsail
Laser Power: 100w
Laser Bed Size: 47"x35"
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: 8.1
Ruida Controller: RDC6445
Windows Version: 10

Just completed a conversion from TopWidom TL-403CB to a Ruida RDC6445G controller. Everything seems to function correctly except the U axis. When pushing the arrow keys either way, the stepper motors sound like they are engaging but there is no movement up or down of the table. I tried different step lengths from 0 - 14. Everything was functioning properly prior to the controller switch over. Any suggestions would be appreciated.
Post Reply

Return to “LaserBond 100 - Forum Sponsor http://www.laserbondingtech.com”