Rotary Table
Posted: Tue Mar 16, 2021
I have been unable to make my chuck rotary table work properly.
It turns during resetting and when I "frame" a file. The problem is in the test mode I can not complete a full turn of the chuck. I have made MANY changes to the rotary file via the Menu icon. I have change the values in "circle pluses" from 1 to 1,000,000 with no luck. I have changed the diameter many times. Clearly I am not on the right track and could use some help.
It turns during resetting and when I "frame" a file. The problem is in the test mode I can not complete a full turn of the chuck. I have made MANY changes to the rotary file via the Menu icon. I have change the values in "circle pluses" from 1 to 1,000,000 with no luck. I have changed the diameter many times. Clearly I am not on the right track and could use some help.