Corel to RD works bitmap issue

[Marija Ujvari]

I work in Corel 12 and send files to RDworks 18.01.48. but i have an issue in the process. When i send bitmap that is placed on a certain position on the box lid, when file get in RDworks the bitmap changes the position on the lid and gets 5cm upper or down on the Y axis. This happens to some bitmaps not to all of them. I tried everything but cant find the issue. Any experience with similar topics please? . Additional problem only present on bitmaps is that i cannot rotate them at any other degree but 90 degree. Everything else rotates just fine, but not bitmaps.

[Dave Vigness]

I use the export macro from Corel to RDWorks all the time, and have never been able to figure out the placement of what is exported. Or are you talking about saving and them opening a file?

[Marija Ujvari]

I also use macro. But when I export it with macro into RDworks the bitmap in RDworks is not on the position as i put it in corel but it is moved somewhere 50mm down or up from original position, so I always have to position bitmaps again when i transfer them in rdworks and it is anoying.

[Dave Vigness]

The only thing I can think of, and I have not tried it, is to make sure the work spaces are the same size. Do some testing and get back to me, I'm working on some other things with one of Ruida's techs on RDWorks. If your two work spaces are the same size, I will add it to my list of things for him to look into.

[Marija Ujvari]

I will try it out today after work. But I think i set it up both on 900x600mm. But maybe i reversed something. I will also check the origin position and everything related. I will get back to you with results. Thanks for the help!

[Gene Uselman]

I would also suggest LightBurn software, I believe they have a much more robust import system.

[Marija Ujvari]

This is the issue I have you can see on photos. I used simple sqares to explain it. On one way set the position of the squares in corel, but when i transfer them via macro in RDworks, one of the square moves along the Y axis. I do not know how to set it up that corel transfer the files as they are seen in corel.

[Dave Vigness]

Weird, I will definitely pass this on to my guy.

[Marija Ujvari]

If you get any answer please write. Im curently working as it is but it is taking more time. The only thing that might help is if you can send me exported setings of your RD. Not vendor but just setting, maybe im missing some options that needs to be checked out. Dunno... If it makes sense.

[Dave Vigness]

Don't know of any settings in the export macro, and it's a locked macro for me. I'd love to edit it to see why it's kicking out a MVB error every time I switch pages.