LaserUser.com Forum (formerly RDWorksLab)

Im Miguel from Portugal and I need help.
I buy a Chinese laser machine 900x600 100w and by mistake I reset machine to default parameters. Can anyone send me vendor settings and RD settings files of a similar machine?

Many tanks

Welcome Miguel - be sure to back up your vendor setting - they are easily lost and sometimes tough to recover.

Pete- I think he now sees the wisdom of your advise

Miguel- we have a subforum section dealing with Vendor files that members have saved and sent in-
viewforum.php?f=100

Find one that is similar to your machine [pay attention to the homing position] and load it and try. If you have your finger close to the Esc button you can stop the homing if it is not responding as you would like.

Hi Pete and Gene

Many thanks for fast reply!

Unfortunately I didn’t save the files before reset to default parameters.

I try to find in fórum the files but I don’t have permission to download or view the files! Is any chance to have that files?

Machines work properly, the only problem is that when he does circles are not perfect!

The supplier takes to long to answer and seems like he didn’t know a lot about these machines

Hi,

Sorry I didn’t see that subforum.
I will take a look.

Many thanks

Hi,

Thanks for all support!

Now I just can’t make a perfect circle.

What could be?

Miguel Vidal wrote: Sat Jul 10, 2021 Hi,

Thanks for all support!

Now I just can’t make a perfect circle.

What could be?

Review this topic

viewtopic.php?f=162&t=5826

Hi Pete

Unfortunately keeps the same

Many thanks for your kindness!