Page 1 of 1
Lightburn not recognizing Ruida 6332m controller
Posted: Thu Aug 05, 2021
by Raymond Baldenegro
I have a question. How are you able to configure lightburn to recognize your Ruida 6332m controller? I ran through the wizard but it does not see the controller, I've reinstalled lightburn and made sure to include the installation of the FTDI serial driver but it still does not recognize my controller. I've tried to manually install it but the ruida controller does not show up as an option to select. I am running lightburn v09.20. I ran a debug by Right-click the ‘Devices’ button in the Laser window as suggested from another blog and am including the file. It recognizes that I have a device connected to the USB port as it dings when i connect or disconnect my laptop from the laser. I am currently running rdwoks v8.01.48. Any assistance will be greatly appreciated.
Re: Lightburn not recognizing Ruida 6332m controller
Posted: Thu Aug 05, 2021
by Pete Cyr
Recommend you wander over to the Lightburn website and ask the admin ther…he created the software…he may choose add your controller to the software
Re: Lightburn not recognizing Ruida 6332m controller
Posted: Fri Aug 06, 2021
by Doug Fisher
Lightburn lists the 6332G as compatible but doesn't mention a 6332M. Maybe that is the issue? Just email Lightburn support directly for the best information.
"Supported Ruida controllers include the RDC6442G/S, RDC6445G, RDC6332G, RDLC-320A, and R5-DSP. "
Re: Lightburn not recognizing Ruida 6332m controller
Posted: Fri Aug 06, 2021
by Gene Uselman
It appears the M variant is a metal cutting controller? This exchange on the Lightburn forum is old but may help:
https://forum.lightburnsoftware.com/t/e ... 33xm/24487