LaserUser.com Forum (formerly RDWorksLab)

hello everyone i am new to using the RD works program. Is there a way to assign default color setting to cutting acrylic 1/4" RD works V8 for example

red = cut
Blue = engrave
Black = scan

a friend has done this with his red works v8 laser and recognizes these colors as above and we need to do this with out setup. unfortunately he doesnt remember how he did it. Are the colors above standard recognition ? Any help would be greatly appreciated. We are setting up a new 100w laser cutter with RD works thanks for your help Best Romano

I dont know a way to set parameter via color but you can store parameters in the layer parameter speed/power/blowing/interval for any or all materials

Thank you the info. this is the parameters box. its exactly what I needed. Thank you very much for your help best Romano