LaserUser.com Forum (formerly RDWorksLab)

I've searched here and there getting a bit of help on LB but it's slow I'm sure I have the 6442 board if someone could link me to the correct place I'd be grateful as I'm running out of beer and headache tablets

The machine I doubt the colour matters it's blue and grey 700x500

I am not so sure that is a 6442- I think that is yet another board from Ruida. That said all the different numbered boards I have had contact with use the same Vendor files so you can try that- look in the FAQ section for Vendor files, we also have a topic with many different ones from various manufacturers. If that is not the file you are looking for, we will need more info please.

That is not a Ruida controller.
It is a Ryxon KT332N.

Is there any recovery files I can use for it

I am unsure - any files we have would be a guess as to if they would work or not and or make things worse

I would guess the OP has seen this on LB- https://forum.lightburnsoftware.com/t/z ... ller/27193

It appears it is either a Ruida clone or is built by Ruida for another company. And that the Z, U and A axis is used differently. I would definitely try a 6442 Vendor file or compare one to the file you have [seems you might have lost the original?] but you can compare to whatever is now on the machine and should be able to see the differences. Or post it and I will try. Gene