Hello
i'm in a retrofit conception with the mecanic of a universal laser M300 i have bought for 100 euros.
The beam window has a collimator the same as link above
https://www.pdi3d.com/UL_VLS_Desktop_Co ... 139-00.htm
can i let it with a 100 w W2 reci laser ? i think yes but not sure
Thank's for help and have a good day
Eric
Universal laser collimator
-
Eric Leduc
- Posts: 2
- Joined: Mon Nov 08, 2021
- Location: North
- Country: France
- Nickname: emart59190
- Laser Machine Make or Type: DIY
- Laser Power: 100
- Laser Bed Size: 16*30
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: 8.01.18
- Ruida Controller: RDC6445
- Windows Version: 7
-
Danny Miller
- Posts: 2
- Joined: Mon Sep 27, 2021
- Location: Austin, TX
- Country: United States
- Laser Machine Make or Type: Tarkin
- Laser Power: 225W
- Laser Bed Size: 1.6m x 1m
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: 8.01.18
- Ruida Controller: RDC6445
- Windows Version: 10
It could, except the beam has to fit within that window, and it's on the small side. The M300 has a very small beam.
IIRC that collimator is a 1.5x or at most a 2x. The beam has to fit the original diameter on the first lens and the expanded diameter on the second. The second one is the larger concern.
IIRC that collimator is a 1.5x or at most a 2x. The beam has to fit the original diameter on the first lens and the expanded diameter on the second. The second one is the larger concern.