Page 1 of 1
Hallo aus Basel
Posted: Tue Jan 18, 2022
by Roger Burkhard
I'm Roger from Basel (Switzerland).
I have owned a blue/grey K50 from China for 4 years.
I mainly make models for the model railway (1/87).
I made some modifications for the laser and built the filter system myself.
Re: Hallo aus Basel
Posted: Tue Jan 18, 2022
by Pete Cyr
Welcome roger - be sure to back up your vendor setting if you have not already.
Re: Hallo aus Basel
Posted: Fri Jan 21, 2022
by Roger Burkhard
Good morning Peter.
Thanks for the guy, but unfortunately he was too late. It was the same as always. Only when it's too late do I realize what should have been done.
But now I also had to deal with the settings and I also taught something about it again.
And since the devil has gotten me, I immediately disassembled the mechanics of the drive and found that the deflection rollers of the Y axis were blocked, such a China botch.
Re: Hallo aus Basel
Posted: Fri Jan 21, 2022
by Roger Burkhard
Please excuse the mistakes.
Google translator:
Guy = tip