LaserUser.com Forum (formerly RDWorksLab)

Hi,

I have been running my machine for about 2 years and have had niggles and solved them.

A few weeks ago the machine made a pop at start-up and the x/y did not move, no power to the control panel.

The laser fires on the test button on main PSU, and water cooling is flowing.

No light on the small PSU
D-150
Input: 100-120VAC 3.2A
200-240VAC 1.6A
50/60HZ
Output: +24V 6.0A
+5V 2.0A

Any ideas of a direct swap I cannot find anything !?

Matt

Replacement for this.

I would look a something like this.
https://www.amazon.com/LRS-150-24-Switc ... 4CWW&psc=1

Meanwell is a good brand- look at the comparable and pick the closest one to yourx.