Hello All
Posted: Wed Apr 05, 2023
Hello from Riyadh, Saudi Arabia:
Name: Abdullah Alkudsi
Location: Riydadh, Saudi Arabia
Country: KSA
Laser Machine Make or Type: No name
Laser Power: 180W
Laser Bed Size: 2000mm x 3000mm
Home Position: TL
Control Software: LaserCAD
RDWorks Version: v8.10
Controller: Trocen AWC708C
I have this old machine at work which has not been working for many years.
I am trying to revive it to do some prototyping work
In my quest to learn about the technology I found the RDWorks Learning lab series by Russ Sadler and then this forum.
My machine does not use Ruida controller or RDWorks but the similarities are striking and I still find the videos and learning material by Russ grealy informative.
Thank you.
Name: Abdullah Alkudsi
Location: Riydadh, Saudi Arabia
Country: KSA
Laser Machine Make or Type: No name
Laser Power: 180W
Laser Bed Size: 2000mm x 3000mm
Home Position: TL
Control Software: LaserCAD
RDWorks Version: v8.10
Controller: Trocen AWC708C
I have this old machine at work which has not been working for many years.
I am trying to revive it to do some prototyping work
In my quest to learn about the technology I found the RDWorks Learning lab series by Russ Sadler and then this forum.
My machine does not use Ruida controller or RDWorks but the similarities are striking and I still find the videos and learning material by Russ grealy informative.
Thank you.