Good To Be Here.
Posted: Thu Sep 28, 2023
Hey all,
Tyler here, looking to expand my knowledge about all things laser. Currently own Xtool F1, quickly decided it was just too small and I wanted bigger, and bigger and bigger. So now im custom building an 80W machine with a 1050x600 cutting bed, and an absolutely massive z-axis with passthrough ability in both X and Y direction (Z-axis movement 30"). Its designed and built to be easily upgraded, extended or otherwise modified. Tentative future plans provided the build finishes well include adding a YAG laser to the system an running dual heads.
Other Build Notes:
NEMA 17 X/Y Axis Steppers 0.9°
NEMA 23 Z Axis Stepper
R6445 Controller
5200 Series Chiller
Custom Fume Extraction/Air Purification
Tyler here, looking to expand my knowledge about all things laser. Currently own Xtool F1, quickly decided it was just too small and I wanted bigger, and bigger and bigger. So now im custom building an 80W machine with a 1050x600 cutting bed, and an absolutely massive z-axis with passthrough ability in both X and Y direction (Z-axis movement 30"). Its designed and built to be easily upgraded, extended or otherwise modified. Tentative future plans provided the build finishes well include adding a YAG laser to the system an running dual heads.
Other Build Notes:
NEMA 17 X/Y Axis Steppers 0.9°
NEMA 23 Z Axis Stepper
R6445 Controller
5200 Series Chiller
Custom Fume Extraction/Air Purification