Hello
Im from sweden and currently in the end stages of building a rather "big" lasercutter for a makerspace. Programmer by trade and is usually found either tinkering with stuff, gaming or 3d printing.
Hi there
-
Ian Bell
- Posts: 163
- Joined: Sat Nov 19, 2016
- Location: Bangor, N. Ireland
excellent, how about some pics and info on your build, might just encourage a few others
Location: Bangor
Country: N. Ireland
Nickname: Ian
Laser Machine: Red/Blk Chinese import (Redsail clone ?)
Power: 80w
Bed Size: 500x700mm
Home: TR
Status: operational
RDWorks Version: V8.01.22
Windows Version: 10
Country: N. Ireland
Nickname: Ian
Laser Machine: Red/Blk Chinese import (Redsail clone ?)
Power: 80w
Bed Size: 500x700mm
Home: TR
Status: operational
RDWorks Version: V8.01.22
Windows Version: 10
-
Gareth Lewis
- Posts: 105
- Joined: Mon Jan 03, 2022
- Location: Aberdare, RCT, Wales
- Country: United Kingdom
- Nickname: Gareth
- Laser Machine Make or Type: Tangerine Tiger
- Laser Power: 50W
- Laser Bed Size: 300 x 500
- Home Position: BL
- Control Software: RDWORKS
- RDWorks Version: v8.01.47
- LightBurn Version: v1.5.03
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Rotary Unit, Camera, digital millammeter, digital thermometer readout
- Contact:
I know Russ Sadler was working on a very large laser cutter for cutting rolls of carpet.
The largest I've used is a 2500 x 1500mm 250W system
It would be great to see some photos of your build.
The largest I've used is a 2500 x 1500mm 250W system
It would be great to see some photos of your build.
Gareth Lewis
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com