Simple Phone Stand

Files that you would like to share with other uses. YOU must have permission to post the file from the OWNER of the file.
By posting, you accept responsibility for any Copyright Issues.
Post Reply
Eric Adams
Posts: 37
Joined: Mon Feb 11, 2019
Location: Decatur, TX
Country: United States
Nickname: Eric
Laser Machine Make or Type: BESCUTTER VERSA
Laser Power: 150W
Laser Bed Size: 52" X 36"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.40
Ruida Controller: Other
Windows Version: 10
Contact:
Contact Eric Adams

I made a phone stand a while back for myself. While my mom was visiting, she asked me to make her one that could be disassembled to carry with her on trips. This is what I came up with. It's pretty simple. The pattern is designed to work with 5mm plywood. I suggest using 5-layer plywood if you decide to engrave it. If you use 3-layer ply, the engraving will cut away the outer layers and it will break pretty easily.

Here's a link to a video showing the design and cutting process. I feel silly sharing this here, considering the audience (with 99.999% of you having more knowledge and experience with lasers than me), but I hope you enjoy the video.

https://youtu.be/wlDpXOLFH_Q
You do not have the required permissions to view the files attached to this post.
Top
Eric Adams
Posts: 37
Joined: Mon Feb 11, 2019
Location: Decatur, TX
Country: United States
Nickname: Eric
Laser Machine Make or Type: BESCUTTER VERSA
Laser Power: 150W
Laser Bed Size: 52" X 36"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.40
Ruida Controller: Other
Windows Version: 10
Contact:
Contact Eric Adams

IMG_6018.JPG
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Gene Uselman
Posts: 2180
Joined: Thu Jul 07, 2016
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

Very nicely done- I notice two different locking keys, either will work but the compressible wood piece appeals to me.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.


The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Top
Eric Adams
Posts: 37
Joined: Mon Feb 11, 2019
Location: Decatur, TX
Country: United States
Nickname: Eric
Laser Machine Make or Type: BESCUTTER VERSA
Laser Power: 150W
Laser Bed Size: 52" X 36"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.40
Ruida Controller: Other
Windows Version: 10
Contact:
Contact Eric Adams

Good catch - I did a couple different versions but didn't notice the other version was in the photo. Here's that wood spring lock version on the right.
You do not have the required permissions to view the files attached to this post.
Top
Pete Cyr
Posts: 1964
Joined: Sun Nov 27, 2016
Location: Suffolk Virginia
Country: United States
Laser Machine Make or Type: Boss 1630
Laser Power: 100w
Laser Bed Size: 16"x30"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.18
Ruida Controller: RDC6442
Windows Version: Win 10
Accessories: roller rotary attachment

Eric Adams wrote: Fri Mar 08, 2019 Good catch - I did a couple different versions but didn't notice the other version was in the photo. Here's that wood spring lock version on the right.
Could you export your files in the form of a DXF or AI.
Unless folks use RDWorks Version: v8.01.19 or newer they will not be able to access the file.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Top
Eric Adams
Posts: 37
Joined: Mon Feb 11, 2019
Location: Decatur, TX
Country: United States
Nickname: Eric
Laser Machine Make or Type: BESCUTTER VERSA
Laser Power: 150W
Laser Bed Size: 52" X 36"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.40
Ruida Controller: Other
Windows Version: 10
Contact:
Contact Eric Adams

Here's the AI version for the spring lock. The pattern is setup to cut two stands. Engrave & cut with the first job, then flip the engraved pieces over and just run the engrave layer on the second job.
Capture.PNG
You do not have the required permissions to view the files attached to this post.
Top
Post Reply

Return to “File Sharing”