vendor settings russ 3050 machine.RDVSet
user_settings russ 3050 machine.RDUSet
Russ 3050 Vendor settings works for 5030 also
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
You do not have the required permissions to view the files attached to this post.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Pete, I think it would be good to also include the home position with the settings? If the settings were from a machine that homes upper left and the members limit switches were upper right, trouble would ensue? I think most are upper right but I sometimes see upper left and occasionally bottom L or Right.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Jeffrey Aley
- Posts: 388
- Joined: Fri Aug 11, 2017
- Location: Folsom, California
- Country: United States
- Laser Machine Make or Type: Kehui
- Laser Power: 50W
- Laser Bed Size: 500mmx300mm
- Home Position: TL
- RDWorks Version: 8.01.24
- Ruida Controller: RDC6442
- Windows Version: Win10 Enterprise
- Accessories: Spray bottle with water (for small fires)
Fire extinguisher (for big fires)
This files in this thread also work for 5030 machines. 
This message is here so that one will find the thread if one searches for 5030 recovery or 5030 vendor settings.
This message is here so that one will find the thread if one searches for 5030 recovery or 5030 vendor settings.-
Andrew Woore
- Posts: 25
- Joined: Thu Jul 15, 2021
- Location: Brummiejum
- Country: England
- Nickname: Jollychappy
- Laser Machine Make or Type: KH-5030
- Laser Power: 50
- Laser Bed Size: 500 X 300
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: V8.01.19
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Front fans , Analogue Amp Meter , upgrade air assist.
Just wanted to say that it was these files that lead me to the forum in the first place.
Now have RD works installed these files downloaded and going to attempt to update and start working back from there to get my 2nd hand erratic machine working .. From turn on it crashes it head into top left etc , so the mission starts here .!
Thanks for the amazing useful information on the site.
Now have RD works installed these files downloaded and going to attempt to update and start working back from there to get my 2nd hand erratic machine working .. From turn on it crashes it head into top left etc , so the mission starts here .!
Thanks for the amazing useful information on the site.
-
Andre Ferrandis
- Posts: 2
- Joined: Mon Mar 07, 2022
- Location: Mato Grosso
- Country: Brasil
- Laser Machine Make or Type: CO2
- Laser Power: 50
- Laser Bed Size: 300x500
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: 8.00.29
- Ruida Controller: RDC6442
- Windows Version: 10
Hi! Just wanted to thank for these files, worked with minor adjustments for one of my machines that I reseted without knowing what I was doing.
Can I upload my files to the forum? Later I will take some pics and specs from my two co2 machines and save the vendor and user setting files.
Can I upload my files to the forum? Later I will take some pics and specs from my two co2 machines and save the vendor and user setting files.
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Can I upload my files to the forum?Andre Ferrandis wrote: Tue Mar 08, 2022 Hi! Just wanted to thank for these files, worked with minor adjustments for one of my machines that I reseted without knowing what I was doing.
Can I upload my files to the forum? Later I will take some pics and specs from my two co2 machines and save the vendor and user setting files.
Yes - -Please list the full machine name/model to help the next person that may need the same.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete