My image is ghosting, or a double image
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
This is normally caused by the beam hitting the nozzle [not centered in the nozzle hole] which causes a reflection in one direction.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Leopold Frilot
- Posts: 8
- Joined: Mon Feb 18, 2019
- Location: Baton Rouge, LA
- Country: United States
- Nickname: Leo
- Laser Machine Make or Type: Chinese Red and Black (Upgraded version)
- Laser Power: 60W
- Laser Bed Size: 20"x28"
- Home Position: TR
- RDWorks Version: 8.01.34
- Windows Version: Vista
- Accessories: Rotary axis for cylinders, Rotary axis for chuck, Model 3000 chiller
Mine was doing that also. It started after I used a q-tip to clean the lens. Apparently I must have loosened the retainer and the lens was vibrating. So I took it apart and cleaned the lens properly then tightened the retainer and problem was solved.