CW-5200 Power Supply

A place for users to ask questions and search for already asked questions. "BE NICE" and helpful!
Post Reply
Justin Bozoian
Posts: 3
Joined: Thu Aug 31, 2017
Location: Las Vegas, NV
Country: United States
Laser Machine Make or Type: Red Chinese
Laser Power: 130W
Laser Bed Size: 35" x 55"
Home Position: TL
RDWorks Version: V8.01.22
Windows Version: 10
Accessories: CW-5200 Chiller

Hi all.
Chiller went out today and I believe I have it narrowed down to the power supply, which looks like a standard AC Adapter box spliced into the machine. I ordered a new one on Amazon, which I’ll have to cut wires and connect to the power switch and the power side. Voltage and whatnot all match up (I checked with someone much more knowledgeable than myself) and I think I’m on the right track, but still a little iffy as far as electrical work goes.
Has anyone replaced the AC Adapter in their chiller? Where did you order the replacement? Any advice or tips? Thanks in advance!
Top
Pete Cyr
Posts: 1964
Joined: Sun Nov 27, 2016
Location: Suffolk Virginia
Country: United States
Laser Machine Make or Type: Boss 1630
Laser Power: 100w
Laser Bed Size: 16"x30"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.18
Ruida Controller: RDC6442
Windows Version: Win 10
Accessories: roller rotary attachment

I have not suffered your fate - yet.

Sorry for the troubles but...some picture of you interior components, the bad pwr supply and anything else that may help the next poor soul with a similar problem would be appreciated.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Top
Justin Bozoian
Posts: 3
Joined: Thu Aug 31, 2017
Location: Las Vegas, NV
Country: United States
Laser Machine Make or Type: Red Chinese
Laser Power: 130W
Laser Bed Size: 35" x 55"
Home Position: TL
RDWorks Version: V8.01.22
Windows Version: 10
Accessories: CW-5200 Chiller

I’ll post some photos when I get the new supply as well as the results.
Top
Pete Cyr
Posts: 1964
Joined: Sun Nov 27, 2016
Location: Suffolk Virginia
Country: United States
Laser Machine Make or Type: Boss 1630
Laser Power: 100w
Laser Bed Size: 16"x30"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.18
Ruida Controller: RDC6442
Windows Version: Win 10
Accessories: roller rotary attachment

thank you
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Top
Justin Bozoian
Posts: 3
Joined: Thu Aug 31, 2017
Location: Las Vegas, NV
Country: United States
Laser Machine Make or Type: Red Chinese
Laser Power: 130W
Laser Bed Size: 35" x 55"
Home Position: TL
RDWorks Version: V8.01.22
Windows Version: 10
Accessories: CW-5200 Chiller

Got it fixed. No photos, because it isn’t necessary. Replaced the ac adapter with one with matching specs from Amazon. The one from Amazon came ready to plug into a wall outlet and a power jack on the other end. Cute those off and spliced it in and voila, good to go. Here is the link to the new ac adapter on Amazon. Can’t be positive that it will work universally across all models and manufacturers, so check your specs. Happy lasering!

BINZET AC to DC 24V 3A Power Supply Adapter Converter Regulator, 5.5mm x 2.1mm DC Plug, 24V 3A 72W Wall Plug Switch for DC24V 10M 5050 LED Strip Lights https://www.amazon.com/dp/B00VE6OJM4/re ... JCbBSR7R79
Top
Post Reply

Return to “User Questions and Help”