Maximum speed and acceleration settings for rdc 6442g?
-
Matt Navarro
- Posts: 1
- Joined: Tue Jan 29, 2019
- Location: Houston/Tx
- Country: United States
- Nickname: Matt
- Laser Machine Make or Type: Boss Laser and Red/Black
- Laser Power: 130W
- Laser Bed Size: ~36x60''
- Home Position: TR
- RDWorks Version: 8.0.23
- Windows Version: 10
- Accessories: Rotary
I’m not sure if anyone has run into this before, but is anyone able to write >2000 mm/s speed or >150,000mm/s^2 acceleration to their controller as maximums ? By my calculations I have not exceeded the controllers driver pulse limit but anything I write above either of these settings immediately drops the setting to the factory default. Running steppers with pulse/direction control.