Hello forum...glad to be here.
I have a 60W CO2 laser off Amazon 'made' by Orion; it's a 20 x 28" unit. For the most part the only material I envision using is 0.02" Fishpaper otherwise known as vulcanized Kraft paper.
Having a difficult time downloading RDWorks, my anti-virus SW says it's a corrupt site. Anyone have any suggestions on where to go for a download would be much appreciated?
Machine is all set up and I've watched what has turned into thousands of YouTube videos on Lasers.
I look forward to learning much more about my machine with the help of all you that already use these wonderful machines.
Thanks
New here
-
Steven Ashley
- Posts: 4
- Joined: Thu Apr 04, 2019
- Location: Seattle, Washington, King
- Country: United States
- Nickname: Steve
- Laser Machine Make or Type: Orion 60W CO2
- Laser Power: 60W
- Laser Bed Size: 20" x 28"
- Home Position: TL
- RDWorks Version: 8
- Windows Version: 8
- Accessories: None yet....stay tuned
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Steven- I would suspect your anti-virus software, some are really conservative. I am not aware of corrupted RDworks downloads, but anything is possible I suppose. I have not heard of that material, what are you making? Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Steven Ashley
- Posts: 4
- Joined: Thu Apr 04, 2019
- Location: Seattle, Washington, King
- Country: United States
- Nickname: Steve
- Laser Machine Make or Type: Orion 60W CO2
- Laser Power: 60W
- Laser Bed Size: 20" x 28"
- Home Position: TL
- RDWorks Version: 8
- Windows Version: 8
- Accessories: None yet....stay tuned
Gene-
Thanks for the good words...I will try disabling the AV SW.
Is the .rar an exclusive type of file? Or is this a type of Zip file? I can download it from this site, but when I try to open it - it takes me to the app store. Have not experienced this problem before.
Fishpaper or vulcanized Kraft paper is an insulator material used in batteries, transformers and many other electrical devices.
Cheers-
Steve
Thanks for the good words...I will try disabling the AV SW.
Is the .rar an exclusive type of file? Or is this a type of Zip file? I can download it from this site, but when I try to open it - it takes me to the app store. Have not experienced this problem before.
Fishpaper or vulcanized Kraft paper is an insulator material used in batteries, transformers and many other electrical devices.
Cheers-
Steve
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Pretty common compression file type, I'm sure there are free programs to unzip them.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Jeffrey Aley
- Posts: 388
- Joined: Fri Aug 11, 2017
- Location: Folsom, California
- Country: United States
- Laser Machine Make or Type: Kehui
- Laser Power: 50W
- Laser Bed Size: 500mmx300mm
- Home Position: TL
- RDWorks Version: 8.01.24
- Ruida Controller: RDC6442
- Windows Version: Win10 Enterprise
- Accessories: Spray bottle with water (for small fires)
Fire extinguisher (for big fires)
I downloaded "Free RAR Extract Frog" for just this purpose. It works.Steven Ashley wrote: Thu Apr 04, 2019 Gene-
Thanks for the good words...I will try disabling the AV SW.
Is the .rar an exclusive type of file? Or is this a type of Zip file? I can download it from this site, but when I try to open it - it takes me to the app store. Have not experienced this problem before.
Fishpaper or vulcanized Kraft paper is an insulator material used in batteries, transformers and many other electrical devices.
Cheers-
Steve