When a job ends the head is homing to the bottom-right (normal homing position is upper-left) then returning to the initial job-start position (where I want it).
How can I stop the controller from doing this? I went through all the settings but only the Return Position under Other in User parameters has any noticeable effect (and it's doing what I want it to do -- return to the initial job-start position).
Homing after cut
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Mark Pipi wrote: Fri Apr 19, 2019 When a job ends the head is homing to the bottom-right (normal homing position is upper-left) then returning to the initial job-start position (where I want it).
How can I stop the controller from doing this? I went through all the settings but only the Return Position under Other in User parameters has any noticeable effect (and it's doing what I want it to do -- return to the initial job-start position).
You do not have the required permissions to view the files attached to this post.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete