New to this site
-
Charles Mullinax
- Posts: 1
- Joined: Tue Apr 30, 2019
- Location: San Antonio, Texas
- Country: U.S.A.
- Nickname: Charles
- Laser Machine Make or Type: Orion Motor Tech
- Laser Power: 60W
- Laser Bed Size: 20 X 28
- Home Position: TL
- RDWorks Version: 8.01.18
- Windows Version: 10
- Accessories: Rotary
I started out with a K40 laser and up graded to a 60w a few months ago. There was a little bit of a learning curve to get use to the differences. With the help I found on line and with the RDworks learning labs by Russ it was fairly painless.
-
Willy Ivy
- Posts: 174
- Joined: Tue Aug 09, 2016
- Location: Pattison, Texas
- Country: USA
- Nickname: Willy
- Laser Machine Make or Type: KH 7050
- Laser Power: 60W
- Laser Bed Size: 12" x 20"
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- LightBurn Version: 1.6.03
- Ruida Controller: RDC6442
- Windows Version: W7 Pro, W10
- Accessories: Hot dog rotary
Gantry powered rotary (plans supplied by Gene Uselman)
Lightburn camera
Homemade chiller (mini fridge)
Ultimate air assist
Dad Burn It Laser (.com) - Contact:
Welcome Charles. Russ has been a big help to many of us. Lots of good info here as well so dig in. And you can ask questions here.
PLEASE! 
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: 
Thank You
Willy
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: Thank You
Willy