I need advice, what is going on?

A place for users to ask questions and search for already asked questions. "BE NICE" and helpful!
Post Reply
User avatar
sebastien laforet
Posts: 143
Joined: Wed Sep 07, 2016
Location: Lyon
Country: France
Laser Machine Make or Type: bodor BCL0605MU
Laser Power: 100W
Laser Bed Size: 60*50cm
Home Position: TR
RDWorks Version: 8.01.19
Windows Version: 7

Chris Ghent wrote: Sat Jul 27, 2019 It is a Reci tube, says,
Max 102.3W
Average 96.29W
In another box it says,
Peak power 102W
Agreement power 90W
looks like a W2 model.

see the original site : http://www.recilaser.com/en/index.php?m ... id=7&id=66
Operation conditions

Water cooling: using purified water; 2 to 5 liter/minute; water temperature: 10℃-40℃.

The operating environment: temperature 2-40℃; Humidity 10-60%.

The working current: test current is 29mA. Maximum working current is 29mA. The running current must be kept below 27mA. The life span can reach 8,000 hours if the current is kept below 25mA. The ammeter must be connected to the negative electrode of laser tube.

When it is working under over-high current for long term, the negative pole will appear light yellow and the life span will be shortened rapidly.
Sébastien Laforet
machine : Bodor BCL-0605 (60x50) with 100W laser with TR origin.
Live in France
Primarily works laser for my wife (school teacher, so lots of boxes, letters, puzzles, ...) and miniature scenery (32mm scale : warmachine, infinity)
Top
User avatar
Gene Uselman
Posts: 2180
Joined: Thu Jul 07, 2016
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

Your tube is a W2- info here- http://www.recilaser.com/en/index.php?m ... id=7&id=66

These are very high quality tubes.


2. Operation conditions

Water cooling: using purified water; 2 to 5 liter/minute; water temperature: 10℃-40℃.

The operating environment: temperature 2-40℃; Humidity 10-60%.

The working current: test current is 29mA. Maximum working current is 29mA. The running current must be kept below 27mA. The life span can reach 8,000 hours if the current is kept below 25mA. The ammeter must be connected to the negative electrode of laser tube.

When it is working under over-high current for long term, the negative pole will appear light yellow and the life span will be shortened rapidly.

To protect dust from going into the insulation sheath, please wrap it with plastic film.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.


The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Top
Post Reply

Return to “User Questions and Help”