) Have I missed a setting somewhere?
Thanks,
Ron
Cutting order not followed
-
Ron Deweyer
- Posts: 6
- Joined: Sat Aug 17, 2019
- Location: Whangarei
- Country: New Zealand
- Nickname: Ron
- Laser Machine Make or Type: Kehui Black/Red
- Laser Power: 60W
- Laser Bed Size: 700 x 500
- Home Position: TL
- RDWorks Version: v8.01.18
- Windows Version: 10
- Accessories: Rotary chuck
I've started created files of items I want to cut out with contain a number of say 30 elements. With the "set cutting property" I move the element in my preferred order to the right column and click Ok. Than when I run the simulation, it is not following the cut order at all. Can't say yet if it would do the same on the actual machine as this is being shipped next week (than an anxious 8 week wait for it to arrive )
Have I missed a setting somewhere?
Thanks,
Ron
) Have I missed a setting somewhere?
Thanks,
Ron
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Check to see if Path Optimize [cutting order] is ticked.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Ron Deweyer
- Posts: 6
- Joined: Sat Aug 17, 2019
- Location: Whangarei
- Country: New Zealand
- Nickname: Ron
- Laser Machine Make or Type: Kehui Black/Red
- Laser Power: 60W
- Laser Bed Size: 700 x 500
- Home Position: TL
- RDWorks Version: v8.01.18
- Windows Version: 10
- Accessories: Rotary chuck
That was it, thank you sir.
I've been looking through all the menu items at the top and tried a few things with "cut optimize" never saw the "path optimize" at the bottom right of the screen till now.
I've got lots to learn.
I've been looking through all the menu items at the top and tried a few things with "cut optimize" never saw the "path optimize" at the bottom right of the screen till now.
I've got lots to learn.
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
We all do Ron. After a while you know the first 30 or 40 things to check.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased