New Member
-
Joe Davenport
- Posts: 1
- Joined: Fri Oct 04, 2019
- Location: Springfield, IL
- Country: USA
- Laser Machine Make or Type: China Blue 12x20 & 51x35
- Laser Power: 40W, 130W
- Laser Bed Size: 12x20 & 51x35
- Home Position: TL
- RDWorks Version: v8.01.26
- Windows Version: 10
I have had a China Blue 50 (40W) laser for about 3 years. The videos Russ has made have been invaluable in learning about the machine. I cannot thank him enough for his time and effort. I have just purchased a 51in x 35in (1300x900mm) machine with a 130W RECI W6 tube. Should have the air and ventilation hooked up by next week...
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Joe- the new laser sounds like a near copy of mine [except I have an EFR tube] and it has brought me much fun and a lot of products. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased