Want to BUy Chuck Rotary
-
Marco Garza
- Posts: 3
- Joined: Fri Apr 13, 2018
- Location: Monterrey
- Country: Mexico
- Nickname: Maco
- Laser Machine Make or Type: XYZ MAchinry
- Laser Power: 150
- Laser Bed Size: 55x 40
- Home Position: BR
- RDWorks Version: 8.01.18
- Windows Version: 7
- Accessories: Chuck Rotary
Hi looking for a chuck style if you have one abandoned let me know
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
Don't have one available, but I have a number of good used stepper motors from ATM's if you want to build one, going for $50 each. 4 wire bipolar HY 200 2220.
-
Ken Witucki
- Posts: 17
- Joined: Wed Jan 01, 2020
- Location: Little Falls, Mn 56345
- Country: United States
- Nickname: Ken
- Laser Machine Make or Type: Red and Black 60 Watt
- Laser Power: 60
- Laser Bed Size: 20 x 28
- Home Position: TL
- RDWorks Version: v8.01.18
- Windows Version: 10
- Accessories: Lightburn
Just ordered this one from aliexpress.com
I will have to make a base.
A bit over kill but i have smaller chucks.
I will have to make a base.
A bit over kill but i have smaller chucks.
You do not have the required permissions to view the files attached to this post.
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
Ah well, my sister would have used it as an excuse to get me to come back up to the tundra. Can't get her out of Sauk.