Hi all,
I have been retired about ten years, and have a no-name 600x400 Chinese CO2 laser cutter that started out at 60W, but I upgraded it to 90W last year.
It is quite well made, but came with a Lihuiyu Nano M2 controller that I don't like much, and am in the process of changing it to a Ruida 6442G
I am a keen follower of Russ Sadler, and look forward to exploring this forum.
Thanks for having me
Regards
Denis Redfern
A little about myself
-
Denis Redfern
- Posts: 1
- Joined: Wed Jan 29, 2020
- Location: Sydney
- Country: Australia
- Laser Machine Make or Type: Chinese
- Laser Power: 90W
- Laser Bed Size: 600x400mm
- Home Position: TL
- RDWorks Version: v8.01.08
- Windows Version: 10
- Accessories: Rotary axis
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Denis- I strongly agree with changing to a Ruida controller, you might then try the LightBurn Demo as that is superior to RDworks in most respects. Ask any questions you may have- our membership is very helpful. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased