Hi everyone
I've just bought a Chinese red and black 60W laser and am finding this site a very useful resource. I'm a hobbyist maker, mostly involving 3D printing and electronics up to now so the laser cutter is going to be a very useful addition to the workshop...
Best regards
Simon
New Member
-
Simon Dawson
- Posts: 1
- Joined: Sat Feb 08, 2020
- Location: Morpeth
- Country: United Kingdom
- Laser Machine Make or Type: Red and black Chinese
- Laser Power: 60W
- Laser Bed Size: 700x500mm
- Home Position: TR
- RDWorks Version: 8.01
- Windows Version: 10
-
Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Windows Version: 10
- Accessories: Modded and still Modding some more.
Welcome Simon,
I share your addictions and plenty more too. The Laser fits in with the printing and my Electronics really well. Nice to be able to pick your weapon to make bits
I share your addictions and plenty more too. The Laser fits in with the printing and my Electronics really well. Nice to be able to pick your weapon to make bits