Hello all,
I'm an freelance entrepreneur living in Gothenburg Sweden, building all kinds of prototypes and display material from many different aspects of professional, artistic and startup life.
I own a Bodor 130 W laser and have had a fairly easy time with it. Especially after some minor upgrades of Air assist, table modifications and stuff like that.
The laser resides in one of the local makerspaces and is being used quite a lot from other people than me which gives it a good variation of tests and actual work. Although it is still I who does a vast amount of the cleaning and upkeep...
Hello from Gothenburg
-
Henrik Horlin
- Posts: 6
- Joined: Fri Feb 28, 2020
- Location: Gothenburg
- Country: Sweden
- Laser Machine Make or Type: Bodor RS CM1390
- Laser Power: 130
- Laser Bed Size: 55x35
- Home Position: TR
- RDWorks Version: 8.01.35
- Windows Version: 10
- Accessories: Rotary axis
-
Willy Ivy
- Posts: 174
- Joined: Tue Aug 09, 2016
- Location: Pattison, Texas
- Country: USA
- Nickname: Willy
- Laser Machine Make or Type: KH 7050
- Laser Power: 60W
- Laser Bed Size: 12" x 20"
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- LightBurn Version: 1.6.03
- Ruida Controller: RDC6442
- Windows Version: W7 Pro, W10
- Accessories: Hot dog rotary
Gantry powered rotary (plans supplied by Gene Uselman)
Lightburn camera
Homemade chiller (mini fridge)
Ultimate air assist
Dad Burn It Laser (.com) - Contact:
Welcome Henrik, glad you found us. Give us a good look around and maybe you'll find something you can use. Jump in a feel at home because there are a lot of good folks here. Happy burning.
PLEASE! 
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: 
Thank You
Willy
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: Thank You
Willy