Anyone able to help that may have some knowledge with RF metal tubes? I have one from the ULS-25E that I am working one and I want to use the 6445G I have so I have something that is working so I can continue my PPE production while I wait for the rest of my parts for my Y-1200 build. I have enclosed the diagram for how the RF is supposed to be connected BUT, I have +/- and RCA terminal on my tube. I have searched google and says to make center pin of coaxial "RCA" the PWM and the shield GND but where does enable go? Is that the V adj. wire from the PSU? Then I would need to know the settings for DSP. RF preginition or no-preginition?
-TIA to all that can offer support!!
ULS-25E with RDC6445G HELP please
-
Aaron Widmer
- Posts: 2
- Joined: Sat Feb 16, 2019
- Location: Reading
- Country: United States
- Nickname: CustomCreations
- Laser Machine Make or Type: K40
- Laser Power: 40W
- Laser Bed Size: 12" x 24"
- Home Position: TL
- RDWorks Version: v8
- Windows Version: 10
You do not have the required permissions to view the files attached to this post.
-
sebastien laforet
- Posts: 143
- Joined: Wed Sep 07, 2016
- Location: Lyon
- Country: France
- Laser Machine Make or Type: bodor BCL0605MU
- Laser Power: 100W
- Laser Bed Size: 60*50cm
- Home Position: TR
- RDWorks Version: 8.01.19
- Windows Version: 7
at least you have to change the "laser mode" from "glass tube" to RF... otherwise, the parameters for frequency will mess everything.
Sébastien Laforet
machine : Bodor BCL-0605 (60x50) with 100W laser with TR origin.
Live in France
Primarily works laser for my wife (school teacher, so lots of boxes, letters, puzzles, ...) and miniature scenery (32mm scale : warmachine, infinity)
machine : Bodor BCL-0605 (60x50) with 100W laser with TR origin.
Live in France
Primarily works laser for my wife (school teacher, so lots of boxes, letters, puzzles, ...) and miniature scenery (32mm scale : warmachine, infinity)
-
Aaron Widmer
- Posts: 2
- Joined: Sat Feb 16, 2019
- Location: Reading
- Country: United States
- Nickname: CustomCreations
- Laser Machine Make or Type: K40
- Laser Power: 40W
- Laser Bed Size: 12" x 24"
- Home Position: TL
- RDWorks Version: v8
- Windows Version: 10
This I already know ;P I need to know the rest of the parameters LOLsebastien laforet wrote: Thu Apr 23, 2020 at least you have to change the "laser mode" from "glass tube" to RF... otherwise, the parameters for frequency will mess everything.
You do not have the required permissions to view the files attached to this post.
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
I am not aware of any others using an RF tube, I searched the forum [and also Lightburn] and only found your topic.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased