Post your 3D prints
-
Philipp Pap
- Posts: 80
- Joined: Wed Mar 15, 2017
- Location: Innsbruck
- Country: Austria
- Laser Machine Make or Type: rdc6445
- Laser Power: 55W
- Laser Bed Size: 50x30cm
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: lightburn
- Ruida Controller: RDC6445
- Windows Version: 10
Here is one of mine, totally useless but nevertheless
You do not have the required permissions to view the files attached to this post.
-
Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Windows Version: 10
- Accessories: Modded and still Modding some more.
Maybe useful on your Lasers or other bit of shop gear.
I have been a bad Printer owner it has been over a week since I used any of them
This is a redrawn print from another prior job.
Due to the size of the Fusion CAD and STL files the Zip is on my Google Drive here https://drive.google.com/open?id=1pfMaF ... 0YlHUuP1pk ** The knurl nut is not shown in the design due to laziness
It suits any length M6 Bolt as is with this or a similar dimension knurl nut (6x8 x 8.3 OD) as is or tweak the Fusion drawing to whatever you like. https://www.ebay.com.au/itm/5-25pcs-M2- ... %7Ciid%3A1 Make sure you have the brass nut nice and hot (200C+) before trying to insert it and the bolt as reheating will cause meltage of the knob. You can also skip adding the Bolt then you can use them on a stud or internal bolt as a hand nut.
A bit random but the Steel Weld Nuts shown work great inside the Aluminium Track available on evilbay or Ali Express https://www.aliexpress.com/item/4000228 ... 7463CSXTab if you need to make a jig or fixture.
Gratuitous use of Laser cut Acrylic on this Router Template for the corners.
Only 20 to go .....
I have been a bad Printer owner it has been over a week since I used any of them
This is a redrawn print from another prior job.Due to the size of the Fusion CAD and STL files the Zip is on my Google Drive here https://drive.google.com/open?id=1pfMaF ... 0YlHUuP1pk ** The knurl nut is not shown in the design due to laziness
It suits any length M6 Bolt as is with this or a similar dimension knurl nut (6x8 x 8.3 OD) as is or tweak the Fusion drawing to whatever you like. https://www.ebay.com.au/itm/5-25pcs-M2- ... %7Ciid%3A1 Make sure you have the brass nut nice and hot (200C+) before trying to insert it and the bolt as reheating will cause meltage of the knob. You can also skip adding the Bolt then you can use them on a stud or internal bolt as a hand nut.
A bit random but the Steel Weld Nuts shown work great inside the Aluminium Track available on evilbay or Ali Express https://www.aliexpress.com/item/4000228 ... 7463CSXTab if you need to make a jig or fixture.
Gratuitous use of Laser cut Acrylic on this Router Template for the corners.
Only 20 to go .....
You do not have the required permissions to view the files attached to this post.
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
This was one of yesterdays prints- when we put in new blinds on our front windows we lost the wand to open/close the blinds. I juryrigged a quick fix that 'kind of' worked... yesterday a designed a U-Joint to couple the dissimilar couplers... and Sweetie smiled. 
You do not have the required permissions to view the files attached to this post.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased