I did the tile a while back when practicing with Lightburn and keep thinking that it would look nice in a wood frame? Could be a wall hanging or trivet or whatever. The tiles are about .3 thick [4.28 square] and I have a lot of .20 and .25 hardwood/mdf plywood. This was a scrap given to me and I think he said it was hickory. Looking at the picture it appears I didn't even get all the flat white paint washed off- it is a reject, didn't like the line at the bottom.
.
Ceramic tile and wood frame
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
You do not have the required permissions to view the files attached to this post.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Good ole Betty Boop.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Windows Version: 10
- Accessories: Modded and still Modding some more.
Even I am old enough to remember seeing Betty Boop Cartoons on one of the two TV Channels we used to have 
My current Laser Ply supplier has just started making something similar to this locally https://plyco.com.au/products/micropanel and I should have a sample pack in the next day or so to play with. Pricing looks 'ok' compared to their straight Ply and some good local and imported hardwood faces.
My current Laser Ply supplier has just started making something similar to this locally https://plyco.com.au/products/micropanel and I should have a sample pack in the next day or so to play with. Pricing looks 'ok' compared to their straight Ply and some good local and imported hardwood faces.
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
I am old enough to have not seen any cartoons- we didn't have TV till I was a senior in HS... and then I had a lot better things to do than watch TV 
. That hardwood ply is what I use most of, in the States Oak is most common but there are a lot of varietys . It is about $100 US for a 4x8 sheet good two sides [.25" usually] - mostly used for cabinetry. Our local DIY store has it good one side [.2"] for about $60 I think.
. That hardwood ply is what I use most of, in the States Oak is most common but there are a lot of varietys . It is about $100 US for a 4x8 sheet good two sides [.25" usually] - mostly used for cabinetry. Our local DIY store has it good one side [.2"] for about $60 I think.If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Willy Ivy
- Posts: 174
- Joined: Tue Aug 09, 2016
- Location: Pattison, Texas
- Country: USA
- Nickname: Willy
- Laser Machine Make or Type: KH 7050
- Laser Power: 60W
- Laser Bed Size: 12" x 20"
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- LightBurn Version: 1.6.03
- Ruida Controller: RDC6442
- Windows Version: W7 Pro, W10
- Accessories: Hot dog rotary
Gantry powered rotary (plans supplied by Gene Uselman)
Lightburn camera
Homemade chiller (mini fridge)
Ultimate air assist
Dad Burn It Laser (.com) - Contact:
4 inch tile framed with reclaimed fence lumber
You do not have the required permissions to view the files attached to this post.
PLEASE! 
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: 
Thank You
Willy
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: Thank You
Willy
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Real nice, how about the US flag in the background? How was it made?
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Willy Ivy
- Posts: 174
- Joined: Tue Aug 09, 2016
- Location: Pattison, Texas
- Country: USA
- Nickname: Willy
- Laser Machine Make or Type: KH 7050
- Laser Power: 60W
- Laser Bed Size: 12" x 20"
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- LightBurn Version: 1.6.03
- Ruida Controller: RDC6442
- Windows Version: W7 Pro, W10
- Accessories: Hot dog rotary
Gantry powered rotary (plans supplied by Gene Uselman)
Lightburn camera
Homemade chiller (mini fridge)
Ultimate air assist
Dad Burn It Laser (.com) - Contact:
Cut all pieces out of 1/8 plywood with laser, painted, assembled to 1/8 mdf and framed with reclaimed fence wood. It is about 16x24.
PLEASE! CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https:
Thank You
Willy
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: Thank You
Willy
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
The star field was cut on the laser perhaps?
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Willy Ivy
- Posts: 174
- Joined: Tue Aug 09, 2016
- Location: Pattison, Texas
- Country: USA
- Nickname: Willy
- Laser Machine Make or Type: KH 7050
- Laser Power: 60W
- Laser Bed Size: 12" x 20"
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- LightBurn Version: 1.6.03
- Ruida Controller: RDC6442
- Windows Version: W7 Pro, W10
- Accessories: Hot dog rotary
Gantry powered rotary (plans supplied by Gene Uselman)
Lightburn camera
Homemade chiller (mini fridge)
Ultimate air assist
Dad Burn It Laser (.com) - Contact:
Yes the star portion as well as the stripes were all cut with the laser. Then they were painted and glued to an mdf backer painted white in the upper left corner for the stars.
The stars look nice and crisp when the picture is taken of the flag but in this picture is was a background for the tile with my wife's feet on the fishing peer. Notice the fishing rod in the upper right side of the tile.
The stars look nice and crisp when the picture is taken of the flag but in this picture is was a background for the tile with my wife's feet on the fishing peer. Notice the fishing rod in the upper right side of the tile.
PLEASE! CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https:
Thank You
Willy
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: Thank You
Willy
-
Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Windows Version: 10
- Accessories: Modded and still Modding some more.
No where else to put this pic in particular so here will do 
I think I might make some small finger jointed boxes with the samples rather than just do test cuts and boring bits Seems nice and flat and close to Ply stiffness even with the MDF core.
I think I might make some small finger jointed boxes with the samples rather than just do test cuts and boring bits Seems nice and flat and close to Ply stiffness even with the MDF core.You do not have the required permissions to view the files attached to this post.