Hi,
a little puzzle made with 10 digits :
Dxf file :
Rld file :
Digital Puzzle
-
Jean-Christophe
- Posts: 12
- Joined: Thu May 09, 2019
- Location: Nice
- Country: France
- Nickname: JC
- Laser Machine Make or Type: Chinese 4040 machine
- Laser Power: 50W
- Laser Bed Size: 400mm x 400mm
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: v8.01.48-20200417
- Ruida Controller: RDC6445
- Windows Version: W10/64bits
- Accessories: RDC6445G controler
You do not have the required permissions to view the files attached to this post.
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Thanks Jean-Christophe- always fun to make something for the little kids in our lives. For users in countries who are still fighting metric measurements- import in mm, it will be a little over 4x5". The DFX comes in as broken line segments [in my program] so the RDworks file may be better for you.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Jean-Christophe
- Posts: 12
- Joined: Thu May 09, 2019
- Location: Nice
- Country: France
- Nickname: JC
- Laser Machine Make or Type: Chinese 4040 machine
- Laser Power: 50W
- Laser Bed Size: 400mm x 400mm
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: v8.01.48-20200417
- Ruida Controller: RDC6445
- Windows Version: W10/64bits
- Accessories: RDC6445G controler
Hi Gene,
Thanks for your message.
Measures are in mm (110mmx130mm) but you can change the size before cutting the puzzle.
Thanks for your message.
Measures are in mm (110mmx130mm) but you can change the size before cutting the puzzle.
-
Fernando Moreira
- Posts: 25
- Joined: Mon May 11, 2020
- Location: Lisboa
- Country: Portugal
- Nickname: FMoreira
- Laser Machine Make or Type: Red & Black Chinese
- Laser Power: 100W
- Laser Bed Size: 700*500
- Home Position: TR
- RDWorks Version: 8.01.10
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: S&A CW-5200 Chiller
Thank You for sharing.
Nice Puzzle.
Nice Puzzle.
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
very nice - thank you.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Windows Version: 10
- Accessories: Modded and still Modding some more.
So I got sidetracked over a coffee 
Took the puzzle dxf and ran it through Fusion for fun. If anyone would like to have a play with Jean-Christophe's design in the third dimension it is here https://a360.co/3dkzpbo
** Note there is Zero parts clearance in the model so if you are tempted to 3D print it use maybe 96-98% for the numbers. Possibly a good way to use up the scrap roll ends. Laser cutting the frame makes a lot of sense still due to the time involved with printing large slabs. For Laser just bump the kerf over what you might normally do so the parts are non binding.
Out of interest Jean-Christophe what software did you generate the dxf with? Some of the internal lines went away from your 10x10mm grid?
Took the puzzle dxf and ran it through Fusion for fun. If anyone would like to have a play with Jean-Christophe's design in the third dimension it is here https://a360.co/3dkzpbo** Note there is Zero parts clearance in the model so if you are tempted to 3D print it use maybe 96-98% for the numbers. Possibly a good way to use up the scrap roll ends. Laser cutting the frame makes a lot of sense still due to the time involved with printing large slabs. For Laser just bump the kerf over what you might normally do so the parts are non binding.
Out of interest Jean-Christophe what software did you generate the dxf with? Some of the internal lines went away from your 10x10mm grid?
You do not have the required permissions to view the files attached to this post.
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Would someone who got this to open please save it to an .ai file? I can't open the file in any of my programs- they all come in as short segments. And the version of .19 will not open it at all. Thanks Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Windows Version: 10
- Accessories: Modded and still Modding some more.
Hope you can make something with this @Gene. In the zip file is a zero kerf dxf and svg format of my Fusion version to play with. Nearly 3am so time for some Zzzzzzz 
You do not have the required permissions to view the files attached to this post.
-
Jean-Christophe
- Posts: 12
- Joined: Thu May 09, 2019
- Location: Nice
- Country: France
- Nickname: JC
- Laser Machine Make or Type: Chinese 4040 machine
- Laser Power: 50W
- Laser Bed Size: 400mm x 400mm
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: v8.01.48-20200417
- Ruida Controller: RDC6445
- Windows Version: W10/64bits
- Accessories: RDC6445G controler
Hi Tim,Tim Mellor wrote: Mon Jun 01, 2020
Out of interest Jean-Christophe what software did you generate the dxf with? Some of the internal lines went away from your 10x10mm grid?
sorry for my late answer, i didn't receive notification about this post.
i draw the original file with inkscape and export it to .dxf format.