Hello All
We are going to make rubber band and geared cars for our students. I am after some files or advice on making gears and sprockets. Any help/files would be greatly appreciated.
Regards
Robert
Sprocket/Gears
-
Robert Dolman
- Posts: 4
- Joined: Tue Jun 23, 2020
- Location: Australia
- Country: NSW
- Laser Machine Make or Type: Woodman 1060
- Laser Power: 80W
- Laser Bed Size: 1000 x 600
- Home Position: TL
- RDWorks Version: v8.01.24
- Ruida Controller: RDC6442
- Windows Version: 10
-
sebastien laforet
- Posts: 143
- Joined: Wed Sep 07, 2016
- Location: Lyon
- Country: France
- Laser Machine Make or Type: bodor BCL0605MU
- Laser Power: 100W
- Laser Bed Size: 60*50cm
- Home Position: TR
- RDWorks Version: 8.01.19
- Windows Version: 7
https://geargenerator.com/
also, you can use the basic gear generator from inkscape.
for the material, mdf and plexiglas could work but are not at all designed for. i think you can use delrin which is a plastic with low friction, but it is more expansive and difficult to find.
also, you can use the basic gear generator from inkscape.
for the material, mdf and plexiglas could work but are not at all designed for. i think you can use delrin which is a plastic with low friction, but it is more expansive and difficult to find.
Sébastien Laforet
machine : Bodor BCL-0605 (60x50) with 100W laser with TR origin.
Live in France
Primarily works laser for my wife (school teacher, so lots of boxes, letters, puzzles, ...) and miniature scenery (32mm scale : warmachine, infinity)
machine : Bodor BCL-0605 (60x50) with 100W laser with TR origin.
Live in France
Primarily works laser for my wife (school teacher, so lots of boxes, letters, puzzles, ...) and miniature scenery (32mm scale : warmachine, infinity)
-
Robert Dolman
- Posts: 4
- Joined: Tue Jun 23, 2020
- Location: Australia
- Country: NSW
- Laser Machine Make or Type: Woodman 1060
- Laser Power: 80W
- Laser Bed Size: 1000 x 600
- Home Position: TL
- RDWorks Version: v8.01.24
- Ruida Controller: RDC6442
- Windows Version: 10
Hello All
https://geargenerator.com/ is awesome however is there a program that does the same that will not charge when downloading dxf files?
I have this but not exactly gear however meshing sprockets could still work.
sproketeer 2.0
Cheers
Robert
https://geargenerator.com/ is awesome however is there a program that does the same that will not charge when downloading dxf files?
I have this but not exactly gear however meshing sprockets could still work.
sproketeer 2.0
Cheers
Robert
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
I think that Fusion 360 has a gear generator add-on function, I can't open it now to check but here is an instructables link that shows an alternate workflow for modeling gears that might be helpful. F360 is free for hobbyists and students and would be very helpful I would think.
.https://www.instructables.com/id/The-Ea ... usion-360/
.https://www.instructables.com/id/The-Ea ... usion-360/
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased