I can send files from LaserBurn just fine when cabled from a laptop to the PC USB port. However a thumb drive with an RD file on it is not read whichever port it is in. When I press File, navigate to Udisk+, Enter, Read Udisk file, Enter, there is a beep and "No Files" is returned.
Hopefully we can solve this as sometimes it's far less efficient to set a laptop up in the shop than to just carry the files on a drive. Thank you.
U-Disk not functioning
-
Don Teeter
- Posts: 13
- Joined: Thu Sep 03, 2020
- Location: Sacramento, CA
- Country: U.S.A.
- Laser Machine Make or Type: CO2 laser, RuiDa ACS RDC644XG controller
- Laser Power: 80W
- Laser Bed Size: 700 x 500
- Home Position: TL
- RDWorks Version: 8.0.32
- Ruida Controller: RDC6442
- Windows Version: 10
Generic with Ruida RDC644XG controller, LASEA F2 80W CO2 laser tube
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
I tried it and never had any luck. Guess I just wasn't holding my mouth right. I just ran a network cable to it and was done. I kow those without a network port have put WiFi dongles on the USB port.
-
Vito Pignataro
- Posts: 4
- Joined: Mon Oct 25, 2021
- Location: Bari
- Country: Italy
- Nickname: Vitordworks
- Laser Machine Make or Type: Rdc644xg
- Laser Power: 80
- Laser Bed Size: 16x30
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01
- Ruida Controller: RDC6445
- Windows Version: Xp
I have the same problem on a rdc644xg.
I can not read the files on a udisk fat32
Can someone help me?
I can not read the files on a udisk fat32
Can someone help me?