Hi everyone,
as per the rules, this is my hello message.
I'm a highschool teacher and the president of the local hackerspace "Makerspaces Mackay, Inc".
I'm heavily involved in the space and have recently had to realign our mirrors for the first time, that was fun...
Being a teacher I get very busy so I'll leave it here,
Thanks for having me.
Kind Regards
Fred
Hello from Mackay
-
Fred Houweling
- Posts: 1
- Joined: Thu Oct 08, 2020
- Location: Australia
- Country: QLD
- Nickname: MrFredH
- Laser Machine Make or Type: HL-1060
- Laser Power: 130
- Laser Bed Size: 1000mm x 600mm
- Home Position: TL
- RDWorks Version: 8.01.40
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Rotary, Red Dot
-
Willy Ivy
- Posts: 174
- Joined: Tue Aug 09, 2016
- Location: Pattison, Texas
- Country: USA
- Nickname: Willy
- Laser Machine Make or Type: KH 7050
- Laser Power: 60W
- Laser Bed Size: 12" x 20"
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- LightBurn Version: 1.6.03
- Ruida Controller: RDC6442
- Windows Version: W7 Pro, W10
- Accessories: Hot dog rotary
Gantry powered rotary (plans supplied by Gene Uselman)
Lightburn camera
Homemade chiller (mini fridge)
Ultimate air assist
Dad Burn It Laser (.com) - Contact:
Welcome Fred.
Lots of good stuff here so settle in and do some reading.
Lots of good stuff here so settle in and do some reading.
PLEASE! 
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: 
Thank You
Willy
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: Thank You
Willy