Anyone got any ideas how to use RDworks to replicate this style. I've tried scan and spacing intervals but can't work out how to do it diagonally. Any suggestions or help?
Diagonal cutting
-
Steve Gary
- Posts: 4
- Joined: Sat Oct 17, 2020
- Location: United Kingdom
- Country: england
- Nickname: steve
- Laser Machine Make or Type: vevor
- Laser Power: 60W
- Laser Bed Size: 70x50cm
- Home Position: TR
- RDWorks Version: v8.01.19
- Ruida Controller: RDC6442
- Windows Version: 10
Anyone got any ideas how to use RDworks to replicate this style. I've tried scan and spacing intervals but can't work out how to do it diagonally. Any suggestions or help?
You do not have the required permissions to view the files attached to this post.
-
Jeffrey Aley
- Posts: 388
- Joined: Fri Aug 11, 2017
- Location: Folsom, California
- Country: United States
- Laser Machine Make or Type: Kehui
- Laser Power: 50W
- Laser Bed Size: 500mmx300mm
- Home Position: TL
- RDWorks Version: 8.01.24
- Ruida Controller: RDC6442
- Windows Version: Win10 Enterprise
- Accessories: Spray bottle with water (for small fires)
Fire extinguisher (for big fires)
Easily? No. But there's always a way. Rotate the object you want to scan using RDWorks. I'd use a "standard" rotation like 30, 45, or 60 degrees. Then place your material on the bed at that angle. If you have a 30 - 60 - 90 drafting triangle, it'll help setting the material at the appropriate angle. Or use a Speed Square for 45 degrees.
Scan with a very wide interval.
Enjoy!
Scan with a very wide interval.
Enjoy!
You do not have the required permissions to view the files attached to this post.
-
Steve Gary
- Posts: 4
- Joined: Sat Oct 17, 2020
- Location: United Kingdom
- Country: england
- Nickname: steve
- Laser Machine Make or Type: vevor
- Laser Power: 60W
- Laser Bed Size: 70x50cm
- Home Position: TR
- RDWorks Version: v8.01.19
- Ruida Controller: RDC6442
- Windows Version: 10
what a good idea! I have been drawing out diagonal cut lines with 2mm spacing for ages, its been a night mare!
how did you get your spacing on the preview scan? mines just a solid block, ive stared at the screen that long i cant see where im going wrong, cheers
how did you get your spacing on the preview scan? mines just a solid block, ive stared at the screen that long i cant see where im going wrong, cheers
-
Jeffrey Aley
- Posts: 388
- Joined: Fri Aug 11, 2017
- Location: Folsom, California
- Country: United States
- Laser Machine Make or Type: Kehui
- Laser Power: 50W
- Laser Bed Size: 500mmx300mm
- Home Position: TL
- RDWorks Version: 8.01.24
- Ruida Controller: RDC6442
- Windows Version: Win10 Enterprise
- Accessories: Spray bottle with water (for small fires)
Fire extinguisher (for big fires)
Thanks.Steve Gary wrote: Sat Oct 17, 2020 what a good idea! I have been drawing out diagonal cut lines with 2mm spacing for ages, its been a night mare!
how did you get your spacing on the preview scan? mines just a solid block, ive stared at the screen that long i cant see where im going wrong, cheers
Go to the layer parameters window where you set up the cut / scan info, and then set the scan interval. Mine says 1.1mm simply because it had been set to 0.1 previously, and I changed it to 1.1 to illustrate the method.
Enjoy!
You do not have the required permissions to view the files attached to this post.