Dear All,
I landed here after watching a lot or Russ' YT videos (I'm only a third of the way).
Since we recently bought a 100W 1400x900mm Chinese laser (you know the red and black made by a gazillion companies)... there is a lot to learn and a healthy community is the best option, especially since these machines do not come with any support and do require a better setup than the one they got when shipped!
With a Trocen TL-3120, Lightburn software, a red dot beam combiner and a 4K camera this is overall a good cutting machine for the price point. But we would like to make it even better and the exchange of info with other users is key in doing so.
Looking forward this forum!
Marco
Hello from Italy, Milan
-
Marco Barbieri
- Posts: 1
- Joined: Thu Oct 29, 2020
- Location: Milan
- Country: Italy
- Nickname: lasercamp
- Laser Machine Make or Type: HQ1490 + trotec
- Laser Power: 100
- Laser Bed Size: 1400x900
- Home Position: TL
- RDWorks Version: none
- Ruida Controller: Other
- Windows Version: 7
-
Bryan Kelly
- Posts: 66
- Joined: Wed Oct 21, 2020
- Location: Ontario
- Country: Canada
- Nickname: BCK
- Laser Machine Make or Type: (Ketai) KT 9060...
- Laser Power: EFR-F2-80 watt
- Laser Bed Size: 900x600
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: V8.01.48
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: honeycomb bed, Hiwin linear guide rails, mA meter, rotary, digital water flow meter w/temp, material pass through, red dot, electric table. 1/4 hp sea line pro 300A chiller..
welcome aboard, alot of knowledgeable and friendly members here..enjoy