Hello from Arizona, USA
-
Jared Kosina
- Posts: 2
- Joined: Sat Nov 28, 2020
- Location: Arizona
- Country: United States
- Laser Machine Make or Type: Red/black chinese laser
- Laser Power: 80w
- Laser Bed Size: 20"x28"
- Home Position: BR
- RDWorks Version: 8
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: Rotary
Been wanting to get into this hobby for awhile now and finally pulled the trigger after doing a ton of research. I have the newer version red/black 80w. Very excited to get started and experimenting. Was reading a ton on the grounding of the machine but thanks to this forum I think I know how to tackle it. My goal tomorrow is to set up my workspace and get the machine up and running. Excited to see what you are all working on.
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Jared- the machine should be grounded but beyond that the wiring problems are usually with the outlets on the back of the machine- I always either replace them or don't use them at all. Be sure to backup your machine parameters, you can find that info in the FAQ section, and ask any questions you may have. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Jared Kosina
- Posts: 2
- Joined: Sat Nov 28, 2020
- Location: Arizona
- Country: United States
- Laser Machine Make or Type: Red/black chinese laser
- Laser Power: 80w
- Laser Bed Size: 20"x28"
- Home Position: BR
- RDWorks Version: 8
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: Rotary
Thanks Gene. Much appreciated