Hi!
I've just checked and V52 is out at RuiDa site
https://780083804obx.scd.wezhan.cn/news ... eId=643416
I'll try it tomorrow.
Enjoy!
RUIDA RDWorks Software Download Links
-
Vicente Ferrando
- Posts: 14
- Joined: Thu Oct 29, 2020
- Location: Quart de Poblet; Valencia
- Country: Spain
- Nickname: mcyv2
- Laser Machine Make or Type: GWeike LC1610N
- Laser Power: 130W
- Laser Bed Size: 1.6m x 1m
- Home Position: TR
- RDWorks Version: v8.01.47
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: Rotary device chunk, Rotary device rollers
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
As usual, no documentation. And now it won't recognize my web cam. The .49 beta at least recognized the web cam.
-
Bryan Kelly
- Posts: 63
- Joined: Wed Oct 21, 2020
- Location: Ontario
- Country: Canada
- Nickname: BCK
- Laser Machine Make or Type: (Ketai) KT 9060...
- Laser Power: EFR-F2-80 watt
- Laser Bed Size: 900x600
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: V8.01.48
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: honeycomb bed, Hiwin linear guide rails, mA meter, rotary, digital water flow meter w/temp, material pass through, red dot, electric table. 1/4 hp sea line pro 300A chiller..
wont recognize, you'd think newer would at least see/recognize the camera, even if no documents for setup etc....hmmmm
any obvious new things, features etc?
any obvious new things, features etc?
-
Yantak Ng
- Posts: 2
- Joined: Wed Feb 03, 2021
- Location: Hong Kong
- Country: Hong Kong
- Nickname: JOENG
- Laser Machine Make or Type: 100W China Laser
- Laser Power: 100W
- Laser Bed Size: 24" x 36"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.47
- Ruida Controller: RDC6445
- Windows Version: win7
Thanks! That is all I am looking for. Because after upgraded to V48, all scan got tilt from right to left.
-
Viktor Valkov
- Posts: 1
- Joined: Mon May 10, 2021
- Location: Plovdiv
- Country: Bulgaria
- Nickname: viktortl
- Laser Machine Make or Type: MAICHUANG
- Laser Power: 100W
- Laser Bed Size: 1600 x 1300 mm
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: 8.01.48
- Ruida Controller: RDC6442
- Windows Version: windows 10
- Accessories: camera CANON EOS 1300D
Hello everybody,
I am new here, and i searched for some solution in Google so I found this forum.
I have the following problem:
With my laser I used RDVisionWorks 1.00.86 and everything was fine, except that I didn't succeed to calibrate the laser and camera - in the edges of the table there were an offset like 2-3 cm. I decide to use RDWorksV8 8.01.48-20200418, after that version 8.01.54-20210513...
With both versions I didn't succeed to open the camera and take image from the camera (even it is setup to take picture and import at the start of the app). The softwere "see" the camera and i![Image]()
t's model, I will attach some screenshots...
I try and install the softwere also to another computer and the problem is same, obviously it is some setting or install driver or something that should me installed additionally. I even succeed to connect the CorelDraw 12 plugin with RDWorksV8 - with which I was very happy, and only remain to setup the camera to be able to work with the software.
If anyone have an idea what it can be, please help me!
https://photos.app.goo.gl/JGgyKcYVMrQRrFQN6
https://photos.app.goo.gl/te5SYZzTApGxRz8m9
https://photos.app.goo.gl/Z5v8dSYwMJXjvprRA
https://photos.app.goo.gl/HE8jqeuyxgrcgSb16
https://photos.app.goo.gl/juue2bdcrCnqi4KR7
https://photos.app.goo.gl/36X2jNGzgnkTeKmo7
I am new here, and i searched for some solution in Google so I found this forum.
I have the following problem:
With my laser I used RDVisionWorks 1.00.86 and everything was fine, except that I didn't succeed to calibrate the laser and camera - in the edges of the table there were an offset like 2-3 cm. I decide to use RDWorksV8 8.01.48-20200418, after that version 8.01.54-20210513...
With both versions I didn't succeed to open the camera and take image from the camera (even it is setup to take picture and import at the start of the app). The softwere "see" the camera and i
I try and install the softwere also to another computer and the problem is same, obviously it is some setting or install driver or something that should me installed additionally. I even succeed to connect the CorelDraw 12 plugin with RDWorksV8 - with which I was very happy, and only remain to setup the camera to be able to work with the software.
If anyone have an idea what it can be, please help me!
https://photos.app.goo.gl/JGgyKcYVMrQRrFQN6
https://photos.app.goo.gl/te5SYZzTApGxRz8m9
https://photos.app.goo.gl/Z5v8dSYwMJXjvprRA
https://photos.app.goo.gl/HE8jqeuyxgrcgSb16
https://photos.app.goo.gl/juue2bdcrCnqi4KR7
https://photos.app.goo.gl/36X2jNGzgnkTeKmo7
-
Savio Thecnic
- Posts: 6
- Joined: Wed May 17, 2017
- Location: Italy
- Country: Italy
- Nickname: SavioThecnic
- Laser Machine Make or Type: 60W Co2 KEHUI X700 Clone Red-black
- Laser Power: 60
- Laser Bed Size: 700x500mm
- Home Position: TL
- RDWorks Version: v8.01.24
- Windows Version: Win7 Pro
- Accessories: 25mm Co2 Laser Beam Combiner 10.6um
Rotating table
Various changes I made to the machine
Reading instrument mA power
Automatic start-up relay Compression and suction with Lase Tube Start - Contact:
Friends a question
i have RDWorksV8_01_48 version and 644XG controller I tried to install the new RDWorksV8_01_60
but I see he no longer has the 644XG on the list so the 48 is the latest version that i can use?
i have RDWorksV8_01_48 version and 644XG controller I tried to install the new RDWorksV8_01_60
but I see he no longer has the 644XG on the list so the 48 is the latest version that i can use?
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
A lot of us no longer keep up to date [or try to] with Ruida software- Lightburn is more stable and a better program IMHO.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Savio Thecnic
- Posts: 6
- Joined: Wed May 17, 2017
- Location: Italy
- Country: Italy
- Nickname: SavioThecnic
- Laser Machine Make or Type: 60W Co2 KEHUI X700 Clone Red-black
- Laser Power: 60
- Laser Bed Size: 700x500mm
- Home Position: TL
- RDWorks Version: v8.01.24
- Windows Version: Win7 Pro
- Accessories: 25mm Co2 Laser Beam Combiner 10.6um
Rotating table
Various changes I made to the machine
Reading instrument mA power
Automatic start-up relay Compression and suction with Lase Tube Start - Contact:
Sorry but Lightburn can talk to 644XG Ruida controller?
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Yessir. 6442 and 6445
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
.59 is that last stable release of RDWorks that I'm aware of. As far as RDWorks, You may still need it to program some of the new registers in the controller firmware. I know that .30 is the latest firmware for the 6445G, and that gets you the job start delay. Some of the other firmware tweaks are still in the works.
I do my design work in Corel, and then pass it through RDWorks via the macro for optimizing and layer order. I tried Light Burn, but I already had Corel and it does so much more, just doesn't have the integrated laser software. It used to be that for a decent camera feature you had to go LightBurn, but the last few revisions of RDWorks aren't bad, and they have a new tweak coming that will allow you to use just a portion of the bed for camera work and a closer camera instead of requiring the whole bed.
I do my design work in Corel, and then pass it through RDWorks via the macro for optimizing and layer order. I tried Light Burn, but I already had Corel and it does so much more, just doesn't have the integrated laser software. It used to be that for a decent camera feature you had to go LightBurn, but the last few revisions of RDWorks aren't bad, and they have a new tweak coming that will allow you to use just a portion of the bed for camera work and a closer camera instead of requiring the whole bed.