looking to upgrade laser head
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
Russ sent me the. dxf file for the slider bracket if you want to cut the pieces from some scrap and do a rough test fit before ordering it from Cloudray.
-
Toby Hope
- Posts: 58
- Joined: Fri Feb 19, 2021
- Location: west midlands
- Country: england
- Nickname: toby
- Laser Machine Make or Type: chinese 600 x 900
- Laser Power: 90
- Laser Bed Size: 2’x3’
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8
- Ruida Controller: Other
- Windows Version: 7
- Accessories: upgraded to hybrid servo, separate cw5200 chiller, lots of extra holes in the body no idea why
cheers Dave, that’s a good idea! but i’ve gone both feet first alreadyDave Vigness wrote: Sat Feb 20, 2021 Russ sent me the. dxf file for the slider bracket if you want to cut the pieces from some scrap and do a rough test fit before ordering it from Cloudray.
i’ll make it work!-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
At least you are close to Russ, he's about an hour N of London.
-
Toby Hope
- Posts: 58
- Joined: Fri Feb 19, 2021
- Location: west midlands
- Country: england
- Nickname: toby
- Laser Machine Make or Type: chinese 600 x 900
- Laser Power: 90
- Laser Bed Size: 2’x3’
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8
- Ruida Controller: Other
- Windows Version: 7
- Accessories: upgraded to hybrid servo, separate cw5200 chiller, lots of extra holes in the body no idea why
he’s been very helpful , i’m getting the lightweight head from him and some spare kit from cloudray code 2020 got me 19% so that helped persuade me to get a few things whilst i was orderingDave Vigness wrote: Sun Feb 21, 2021 At least you are close to Russ, he's about an hour N of London.
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
I'll remember the code, I had to go via email and pay via a bank draft to get that.
-
Toby Hope
- Posts: 58
- Joined: Fri Feb 19, 2021
- Location: west midlands
- Country: england
- Nickname: toby
- Laser Machine Make or Type: chinese 600 x 900
- Laser Power: 90
- Laser Bed Size: 2’x3’
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8
- Ruida Controller: Other
- Windows Version: 7
- Accessories: upgraded to hybrid servo, separate cw5200 chiller, lots of extra holes in the body no idea why
i downloaded the app as they were pushing it, saw the code on the app and it happened to work in the laptop where i already had my stuff, happy daysDave Vigness wrote: Sun Feb 21, 2021 I'll remember the code, I had to go via email and pay via a bank draft to get that.
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
Download what app?
-
Toby Hope
- Posts: 58
- Joined: Fri Feb 19, 2021
- Location: west midlands
- Country: england
- Nickname: toby
- Laser Machine Make or Type: chinese 600 x 900
- Laser Power: 90
- Laser Bed Size: 2’x3’
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8
- Ruida Controller: Other
- Windows Version: 7
- Accessories: upgraded to hybrid servo, separate cw5200 chiller, lots of extra holes in the body no idea why
the cloudray shopping app
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
Didn't know they had one. Is it on their web site. I have Android. BTW< they have a remote app for android, works great.
-
Toby Hope
- Posts: 58
- Joined: Fri Feb 19, 2021
- Location: west midlands
- Country: england
- Nickname: toby
- Laser Machine Make or Type: chinese 600 x 900
- Laser Power: 90
- Laser Bed Size: 2’x3’
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8
- Ruida Controller: Other
- Windows Version: 7
- Accessories: upgraded to hybrid servo, separate cw5200 chiller, lots of extra holes in the body no idea why
i’m on apple so just download from the app store, saw the 2020 code and just went back to the laptop and used the codeDave Vigness wrote: Tue Feb 23, 2021 Didn't know they had one. Is it on their web site. I have Android. BTW< they have a remote app for android, works great.
