I was using Lightburn on my OMT 50W laser and everything was going well! The hard drive crashed along with all the data that was on it. So that is gone. I have another computer so I was trying to setup LightBurn on there. When I open LB the device setup finds the Ruida driver but I get this "Ruida 644xg DSP" under that it says "You have chosen a DSP device, But you do not have a DSP license" . When I go to create Manually “Ruida” doesn’t show up on the list of drivers. Remembering that I am a newbie can you please help me Lightburn to work again?
Thank you
Chuck
Ruida & LightBurn
-
Chuck Smith
- Posts: 3
- Joined: Sun Feb 28, 2021
- Location: Ringgold , GA Whitfield county
- Country: United States
- Nickname: Chuck
- Laser Machine Make or Type: OMT 50 W
- Laser Power: 50
- Laser Bed Size: 12x 20
- Home Position: BR
- Control Software: LIGHTBURN
- RDWorks Version: v8
- Ruida Controller: Other
- Windows Version: 10
- Accessories: no added accessories
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
You need to contact Lightburn... They will straighten it out for you.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Chuck Smith
- Posts: 3
- Joined: Sun Feb 28, 2021
- Location: Ringgold , GA Whitfield county
- Country: United States
- Nickname: Chuck
- Laser Machine Make or Type: OMT 50 W
- Laser Power: 50
- Laser Bed Size: 12x 20
- Home Position: BR
- Control Software: LIGHTBURN
- RDWorks Version: v8
- Ruida Controller: Other
- Windows Version: 10
- Accessories: no added accessories
Thank you!! I wish they were prompt to respond as you were!!! Thanks
Chuck
Chuck
-
Lightburn Admin
- Posts: 58
- Joined: Wed May 31, 2017
- Location: California
- Country: United States
- Nickname: LBAdmin
- Laser Machine Make or Type: Kehui 700x500 (Ruida controller)
- Laser Power: 100w
- Laser Bed Size: 700 x 500mm
- Home Position: TR
- RDWorks Version: 8.0.18
- Windows Version: 10
- Contact:
We usually are, but so far I don't see anything from a 'Chuck Smith' in our support emails.