Alguém sabe porque acontece isto na varredura?
Aparecem estes pontos e não consigo resolver.
Sugestão de resolução
-
Paulo Oliveira
- Posts: 4
- Joined: Fri Feb 26, 2021
- Location: Barcelos
- Country: Portugal
- Nickname: Oliveira
- Laser Machine Make or Type: 1300x900
- Laser Power: 130
- Laser Bed Size: 1300x900
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: V8.01.11
- Ruida Controller: Other
- Windows Version: 10 pro
You do not have the required permissions to view the files attached to this post.
-
Sascha Wald
- Posts: 4
- Joined: Thu Feb 04, 2021
- Location: Saarland
- Country: Germany
- Laser Machine Make or Type: blue chinese laser cutter
- Laser Power: 50
- Laser Bed Size: 12"x15"
- Home Position: BL
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Windows 10
Hi Paulo,
Please write in english next time that everybody can read it without translator.
There are a few possibilities.
1. Your laser file has this dots
2. the "laser on signal" has inteferences on his line
3. your psu has a problem
Please write in english next time that everybody can read it without translator.
There are a few possibilities.
1. Your laser file has this dots
2. the "laser on signal" has inteferences on his line
3. your psu has a problem
-
Ian Bell
- Posts: 163
- Joined: Sat Nov 19, 2016
- Location: Bangor, N. Ireland
Hi Paulo,
I think the source image file is the issue. Edit the image to remove any background blemishes. Let us know how you resolve.
Acho que o arquivo de imagem de origem é o problema. Edite a imagem para remover manchas de fundo. Deixe-nos saber como você resolve.
I think the source image file is the issue. Edit the image to remove any background blemishes. Let us know how you resolve.
Acho que o arquivo de imagem de origem é o problema. Edite a imagem para remover manchas de fundo. Deixe-nos saber como você resolve.
Location: Bangor
Country: N. Ireland
Nickname: Ian
Laser Machine: Red/Blk Chinese import (Redsail clone ?)
Power: 80w
Bed Size: 500x700mm
Home: TR
Status: operational
RDWorks Version: V8.01.22
Windows Version: 10
Country: N. Ireland
Nickname: Ian
Laser Machine: Red/Blk Chinese import (Redsail clone ?)
Power: 80w
Bed Size: 500x700mm
Home: TR
Status: operational
RDWorks Version: V8.01.22
Windows Version: 10
-
Paulo Oliveira
- Posts: 4
- Joined: Fri Feb 26, 2021
- Location: Barcelos
- Country: Portugal
- Nickname: Oliveira
- Laser Machine Make or Type: 1300x900
- Laser Power: 130
- Laser Bed Size: 1300x900
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: V8.01.11
- Ruida Controller: Other
- Windows Version: 10 pro
Hi this problem apen in all the drawings,
i suspect the step motor driver have a bad configuracion
i suspect the step motor driver have a bad configuracion