Yeah, she comes to me for answers unless she really thinks she knows what she's doing, and then it's all the software's fault when it can't read her mind.
Plating with a few of the S and S products. 30 day demo, and so far so good. A few little quirks, but the price is right. Once she gets to a multi needle machine that could always change.
Toally off topic
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
-
Rodney Edington
- Posts: 97
- Joined: Wed Feb 24, 2021
- Location: Leavenworth Ks
- Country: USA
- Nickname: Rodney
- Laser Machine Make or Type: K 40 Building a 22"X 38"
- Laser Power: 60 watt
- Laser Bed Size: 22"X38"
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: NA
- Ruida Controller: RDC6445
- Windows Version: 7
Dave,
My wife has 2, 6 needle Baby Lock's and uses floriani software among others for digitizing. If you have any more questions about digitizing, or any other embroidering questions, drop me a PM and I will relay them to my wife for answers.
Rodney
My wife has 2, 6 needle Baby Lock's and uses floriani software among others for digitizing. If you have any more questions about digitizing, or any other embroidering questions, drop me a PM and I will relay them to my wife for answers.
Rodney
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
I did a few for her on some trial software, but her ESP wasn't functioning properly and I couldn't make what she couldn't describe. Broke my heart when she took over her own digitizing experiments. I'll play with the laser and she can play with her embroidery machine. She has to make enough with the single needle to be able to afford the multi needle. She's been drooling at the 16 needle YouTube videos... LOL