Rodney,
I model the Great Northern and Northern Pacific in central Minnesota in 1956 in HO scale. I would interested in sharing files with you and Jeff. Jeff has already sent me a few files to help get me started using the laser cutter. I will also be helping build some structures for friend's layout. One of my first efforts will be modeling the Sussex, NJ depot on the NYS&W for Jerry Dziedzic's layout. This building was one of the things that helped convince me to buy the laser cutter. I was struggling finding ways of modeling the various arched windows (with wooden shutters) and decorative supports for the full-length awnings on each side of the depot.
Sincerely,
Rich Remiarz
Hello from Minnesota
-
Richard Remiarz
- Posts: 4
- Joined: Sat Apr 17, 2021
- Location: Vadnais Heights, MN
- Country: USA
- Nickname: Rich
- Laser Machine Make or Type: 50W blue & white purchased from Orion Motor Tech
- Laser Power: 50W
- Laser Bed Size: 12 " x 20"
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: V8.01.49
- Ruida Controller: RDC6445
- Windows Version: 10 Home
- Accessories: rotary axis
-
Rodney Edington
- Posts: 97
- Joined: Wed Feb 24, 2021
- Location: Leavenworth Ks
- Country: USA
- Nickname: Rodney
- Laser Machine Make or Type: K 40 Building a 22"X 38"
- Laser Power: 60 watt
- Laser Bed Size: 22"X38"
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: NA
- Ruida Controller: RDC6445
- Windows Version: 7
Hi Rich
Sent a PM
Sent a PM