Hello from CT USA

[Rick Oat]

hello, i am new to the Co2 laser game. I have been using lasergrbl for a couple of years and 3d printing as well. i do design and machining mostly for myself use. i have a 80w omtech red and black with the one piece front window. i have upgraded to the cloud ray C series head and have Stl files i drew in fusion for an adapter for the front mount rail bracket if any intrest.

[Gene Uselman]

Welcome Rick- we advise recording your Vendor files as they are easy to lose and sometimes hard to find later. Not sure which bracket you are offering- perhaps a picture would help. Gene

[Rick Oat]

not sure were to post, but it is a 3d printed to replace the thick aluminum plate.

[Gene Uselman]

That part must be unique to your machine... but I love it. What program do you use? I very much enjoy designing in Fusion 360 and have two Prusa printers to make my designs real.

[Rick Oat]

I used fusion 360, it is the 80w omtech i have had it only a month. i did not want to cut the stock angle bracket like russ did, so I made it fit. the stock head was the 16.3 mm tube but wanted it to be like russ's with the 24mm tube for the longer focal length lens as thing like to flame up if nozzle is to far away from the work.

[Gene Uselman]

Well done. You will fit into the laser world well.