Rob From Yankalilla South Aust

New members should make their first post here before posting elsewhere on the forum. Please introduce yourself, your laser machine, your software and what you hope to use the forum for.
If English is not your first language, use the Select Language box at the top right of the forum.
Post Reply
Rob Moule
Posts: 1
Joined: Thu Aug 26, 2021
Location: yankalilla south australia
Country: australia
Laser Machine Make or Type: chineese
Laser Power: 60
Laser Bed Size: 16/30
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8
Ruida Controller: RDC6442
Windows Version: 10

Hi All
I have been learning the slow hard way
started with a small 30w with msidraw
hve upgraded to a 60w with RDworks .. so much better
rotary table next
Thanks all
Top
User avatar
Gene Uselman
Posts: 2181
Joined: Thu Jul 07, 2016
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

Welcome Rob- be sure to save your vendor settings as they are often lost and often hard to find. As far as rotarys go I think that Russ' acrylic build is brilliant and if you want to go deeper I have redesigned it with 2020 alum extrusion. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.


The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Top
Post Reply

Return to “New Members - Introduce Yourself First”