Hello from Brasil
-
Stephen Prescott
- Posts: 5
- Joined: Wed Sep 08, 2021
- Location: essex
- Country: United Kingdom
- Laser Machine Make or Type: K40
- Laser Power: 50w
- Laser Bed Size: 424mm x425mm
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: 8
- Ruida Controller: RDC6442
- Windows Version: win 7
Originally from the UK, now living in Brasil, Have a K40 and converting to Ruida control, have been using a diode laser with good results on ceramic tiles., but very slow, hoping CO2 laser will be a lot faster
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Stephen- the co2 laser should be a step up from your diode. We recommend recording your Vendor and User files per the FAQ section as they are often lost, especially in the early days of figuring out what happens when this button is pushed. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased