The machine I doubt the colour matters it's blue and grey 700x500
What file do I need for restore
-
Adrian Barrett
- Posts: 6
- Joined: Sat Oct 02, 2021
- Location: cumbria
- Country: united kingdom
- Nickname: ade
- Laser Machine Make or Type: sh-g570 grey and blue
- Laser Power: 80
- Laser Bed Size: 500x700
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: 23.01.10
- Ruida Controller: RDC6445
- Windows Version: 10
I've searched here and there getting a bit of help on LB but it's slow I'm sure I have the 6442 board if someone could link me to the correct place I'd be grateful as I'm running out of beer and headache tablets
The machine I doubt the colour matters it's blue and grey 700x500
The machine I doubt the colour matters it's blue and grey 700x500
You do not have the required permissions to view the files attached to this post.
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
I am not so sure that is a 6442- I think that is yet another board from Ruida. That said all the different numbered boards I have had contact with use the same Vendor files so you can try that- look in the FAQ section for Vendor files, we also have a topic with many different ones from various manufacturers. If that is not the file you are looking for, we will need more info please.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
That is not a Ruida controller.
It is a Ryxon KT332N.
It is a Ryxon KT332N.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
Adrian Barrett
- Posts: 6
- Joined: Sat Oct 02, 2021
- Location: cumbria
- Country: united kingdom
- Nickname: ade
- Laser Machine Make or Type: sh-g570 grey and blue
- Laser Power: 80
- Laser Bed Size: 500x700
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: 23.01.10
- Ruida Controller: RDC6445
- Windows Version: 10
Is there any recovery files I can use for it
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
I am unsure - any files we have would be a guess as to if they would work or not and or make things worse
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
I would guess the OP has seen this on LB- https://forum.lightburnsoftware.com/t/z ... ller/27193
It appears it is either a Ruida clone or is built by Ruida for another company. And that the Z, U and A axis is used differently. I would definitely try a 6442 Vendor file or compare one to the file you have [seems you might have lost the original?] but you can compare to whatever is now on the machine and should be able to see the differences. Or post it and I will try. Gene
It appears it is either a Ruida clone or is built by Ruida for another company. And that the Z, U and A axis is used differently. I would definitely try a 6442 Vendor file or compare one to the file you have [seems you might have lost the original?] but you can compare to whatever is now on the machine and should be able to see the differences. Or post it and I will try. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased