Hello from San Antonio

Post Reply
David Wood
Posts: 7
Joined: Mon Oct 04, 2021
Location: San Antonio Texas
Country: United States
Laser Machine Make or Type: World Laser
Laser Power: 60-80
Laser Bed Size: 24 x 36
Home Position: TL
Control Software: RDWORKS
RDWorks Version: v8.01.54
Ruida Controller: RDC6445
Windows Version: 10

New to lasers. Rescued a 60X90 Laser made by World Laser from a customer. Had been sitting outside for some years. Lots of cleaning and a new control panel and it is almost back alive.
Top
User avatar
Gene Uselman
Posts: 2181
Joined: Thu Jul 07, 2016
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

Welcome David- I answered your other thread already. You will not have a Vendor file to save but you can probably find one that can be modified in the Rescue / Vendor file section. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.


The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Top
Post Reply

Return to “Tell Us About You”